Binary options brokers with low minimum deposit Mr Option

Start trading Binary options today at the comfort of your home and make minimum of $1,000 in 3 days from a Deposit of $100. To start trading DM me for more details please.

Start trading Binary options today at the comfort of your home and make minimum of $1,000 in 3 days from a Deposit of $100. To start trading DM me for more details please. submitted by Sandrajames77 to u/Sandrajames77 [link] [comments]

binary option robot minimum deposit

Binary options are sometimes called all or nothing, digital or fixed return options trading. binary option robot minimum deposit. Binary options trading is the new simple, straight forward and an interesting way to trade assets where a trader has to predict whether the market price of a certain asset will go up or down over a specific amount of time.
Binary options robots are automated software used by binary option traders to take care of their investments without taking up too much of their time. The 100% automated robots follow market trends to make the right trading decision and have become very popular among traders because of their high percentages of winning compared to losing. A binary options robot makes one of the best trading solutions,

submitted by koutes09 to u/koutes09 [link] [comments]

Trading Discussion • Binary Options Low Minimum Deposit Brokers List - Trade Crypto Assets from 5$ Minimum Deposit! up to 95% Profit/Trade!

submitted by btcforumbot to BtcForum [link] [comments]

Binary Options with Bitcoin | $1 Minimum Deposit

Binary Options with Bitcoin | $1 Minimum Deposit submitted by OptionCentre to Bitcoin [link] [comments]

Ethereum on ARM. New Eth2.0 Raspberry Pi 4 image for joining the Medalla multi-client testnet. Step-by-step guide for installing and activating a validator (Prysm, Teku, Lighthouse and Nimbus clients included)

TL;DR: Flash your Raspberry Pi 4, plug in an ethernet cable, connect the SSD disk and power up the device to join the Eth2.0 medalla testnet.
The image takes care of all the necessary steps to join the Eth2.0 Medalla multi-client testnet [1], from setting up the environment and formatting the SSD disk to installing, managing and running the Eth1.0 and Eth2.0 clients.
You will only need to choose an Eth2.0 client, start the beacon chain service and activate / run the validator.
Note: this is an update for our previous Raspberry Pi 4 Eth2 image [2] so some of the instructions are directly taken from there.

MAIN FEATURES

SOFTWARE INCLUDED

INSTALLATION GUIDE AND USAGE

RECOMMENDED HARDWARE AND SETUP
STORAGE
You will need an SSD to run the Ethereum clients (without an SSD drive there’s absolutely no chance of syncing the Ethereum blockchain). There are 2 options:
Use an USB portable SSD disk such as the Samsung T5 Portable SSD.
Use an USB 3.0 External Hard Drive Case with a SSD Disk. In our case we used a Inateck 2.5 Hard Drive Enclosure FE2011. Make sure to buy a case with an UASP compliant chip, particularly, one of these: JMicron (JMS567 or JMS578) or ASMedia (ASM1153E).
In both cases, avoid getting low quality SSD disks as it is a key component of your node and it can drastically affect the performance (and sync times). Keep in mind that you need to plug the disk to an USB 3.0 port (in blue).
IMAGE DOWNLOAD AND INSTALLATION
1.- Download the image:
http://www.ethraspbian.com/downloads/ubuntu-20.04.1-preinstalled-server-arm64+raspi-eth2-medalla.img.zip
SHA256 149cb9b020d1c49fcf75c00449c74c6f38364df1700534b5e87f970080597d87
2.- Flash the image
Insert the microSD in your Desktop / Laptop and download the file.
Note: If you are not comfortable with command line or if you are running Windows, you can use Etcher [10]
Open a terminal and check your MicroSD device name running:
sudo fdisk -l
You should see a device named mmcblk0 or sdd. Unzip and flash the image:
unzip ubuntu-20.04.1-preinstalled-server-arm64+raspi-eth2-medalla.img.zip
sudo dd bs=1M if=ubuntu-20.04.1-preinstalled-server-arm64+raspi.img of=/dev/mmcblk0 conv=fdatasync status=progress
3.- Insert de MicroSD into the Raspberry Pi 4. Connect an Ethernet cable and attach the USB SSD disk (make sure you are using a blue port).
4.- Power on the device
The Ubuntu OS will boot up in less than one minute but you will need to wait approximately 7-8 minutes in order to allow the script to perform the necessary tasks to install the Medalla setup (it will reboot again)
5.- Log in
You can log in through SSH or using the console (if you have a monitor and keyboard attached)
User: ethereum Password: ethereum 
You will be prompted to change the password on first login, so you will need to log in twice.
6.- Forward 30303 port in your router (both UDP and TCP). If you don’t know how to do this, google “port forwarding” followed by your router model. You will need to open additional ports as well depending on the Eth2.0 client you’ve chosen.
7.- Getting console output
You can see what’s happening in the background by typing:
sudo tail -f /valog/syslog
8.- Grafana Dashboards
There are 5 Grafana dashboards available to monitor the Medalla node (see section “Grafana Dashboards” below).

The Medalla Eth2.0 multi-client testnet

Medalla is the official Eth2.0 multi-client testnet according to the latest official specification for Eth2.0, the v0.12.2 [11] release (which is aimed to be the final) [12].
In order to run a Medalla Eth 2.0 node you will need 3 components:
The image takes care of the Eth1.0 setup. So, once flashed (and after a first reboot), Geth (Eth1.0 client) starts to sync the Goerli testnet.
Follow these steps to enable your Eth2.0 Ethereum node:
CREATE THE VALIDATOR KEYS AND MAKE THE DEPOSIT
We need to get 32 Goerli ETH (fake ETH) ir order to make the deposit in the Eth2.0 contract and run the validator. The easiest way of getting ETH is by joining Prysm Discord's channel.
Open Metamask [14], select the Goerli Network (top of the window) and copy your ETH Address. Go to:
https://discord.com/invite/YMVYzv6
And open the “request-goerli-eth” channel (on the left)
Type:
!send $YOUR_ETH_ADDRESS (replace it with the one copied on Metamask)
You will receive enough ETH to run 1 validator.
Now it is time to create your validator keys and the deposit information. For your convenience we’ve packaged the official Eth2 launchpad tool [4]. Go to the EF Eth2.0 launchpad site:
https://medalla.launchpad.ethereum.org/
And click “Get started”
Read and accept all warnings. In the next screen, select 1 validator and go to your Raspberry Pi console. Under the ethereum account run:
cd && deposit --num_validators 1 --chain medalla
Choose your mnemonic language and type a password for keeping your keys safe. Write down your mnemonic password, press any key and type it again as requested.
Now you have 2 Json files under the validator_keys directory. A deposit data file for sending the 32 ETH along with your validator public key to the Eth1 chain (goerli testnet) and a keystore file with your validator keys.
Back to the Launchpad website, check "I am keeping my keys safe and have written down my mnemonic phrase" and click "Continue".
It is time to send the 32 ETH deposit to the Eth1 chain. You need the deposit file (located in your Raspberry Pi). You can, either copy and paste the file content and save it as a new file in your desktop or copy the file from the Raspberry to your desktop through SSH.
1.- Copy and paste: Connected through SSH to your Raspberry Pi, type:
cat validator_keys/deposit_data-$FILE-ID.json (replace $FILE-ID with yours)
Copy the content (the text in square brackets), go back to your desktop, paste it into your favourite editor and save it as a json file.
Or
2.- Ssh: From your desktop, copy the file:
scp [email protected]$YOUR_RASPBERRYPI_IP:/home/ethereum/validator_keys/deposit_data-$FILE_ID.json /tmp
Replace the variables with your data. This will copy the file to your desktop /tmp directory.
Upload the deposit file
Now, back to the Launchpad website, upload the deposit_data file and select Metamask, click continue and check all warnings. Continue and click “Initiate the Transaction”. Confirm the transaction in Metamask and wait for the confirmation (a notification will pop up shortly).
The Beacon Chain (which is connected to the Eth1 chain) will detect this deposit (that includes the validator public key) and the Validator will be enabled.
Congrats!, you just started your validator activation process.
CHOOSE AN ETH2.0 CLIENT
Time to choose your Eth2.0 client. We encourage you to run Lighthouse, Teku or Nimbus as Prysm is the most used client by far and diversity is key to achieve a resilient and healthy Eth2.0 network.
Once you have decided which client to run (as said, try to run one with low network usage), you need to set up the clients and start both, the beacon chain and the validator.
These are the instructions for enabling each client (Remember, choose just one Eth2.0 client out of 4):
LIGHTHOUSE ETH2.0 CLIENT
1.- Port forwarding
You need to open the 9000 port in your router (both UDP and TCP)
2.- Start the beacon chain
Under the ethereum account, run:
sudo systemctl enable lighthouse-beacon
sudo systemctl start lighthouse-beacon
3.- Start de validator
We need to import the validator keys. Run under the ethereum account:
lighthouse account validator import --directory=/home/ethereum/validator_keys
Then, type your previously defined password and run:
sudo systemctl enable lighthouse-validator
sudo systemctl start lighthouse-validator
The Lighthouse beacon chain and validator are now enabled

PRYSM ETH2.0 CLIENT
1.- Port forwarding
You need to open the 13000 and 12000 ports in your router (both UDP and TCP)
2.- Start the beacon chain
Under the ethereum account, run:
sudo systemctl enable prysm-beacon
sudo systemctl start prysm-beacon
3.- Start de validator
We need to import the validator keys. Run under the ethereum account:
validator accounts-v2 import --keys-dir=/home/ethereum/validator_keys
Accept the default wallet path and enter a password for your wallet. Now enter the password previously defined.
Lastly, set up your password and start the client:
echo "$YOUR_PASSWORD" > /home/ethereum/validator_keys/prysm-password.txt
sudo systemctl enable prysm-validator
sudo systemctl start prysm-validator
The Prysm beacon chain and the validator are now enabled.

TEKU ETH2.0 CLIENT
1.- Port forwarding
You need to open the 9151 port (both UDP and TCP)
2.- Start the Beacon Chain and the Validator
Under the Ethereum account, check the name of your keystore file:
ls /home/ethereum/validator_keys/keystore*
Set the keystore file name in the teku config file (replace the $KEYSTORE_FILE variable with the file listed above)
sudo sed -i 's/changeme/$KEYSTORE_FILE/' /etc/ethereum/teku.conf
Set the password previously entered:
echo "yourpassword" > validator_keys/teku-password.txt
Start the beacon chain and the validator:
sudo systemctl enable teku
sudo systemctl start teku
The Teku beacon chain and validator are now enabled.

NIMBUS ETH2.0 CLIENT
1.- Port forwarding
You need to open the 19000 port (both UDP and TCP)
2.- Start the Beacon Chain and the Validator
We need to import the validator keys. Run under the ethereum account:
beacon_node deposits import /home/ethereum/validator_keys --data-dir=/home/ethereum/.nimbus --log-file=/home/ethereum/.nimbus/nimbus.log
Enter the password previously defined and run:
sudo systemctl enable nimbus
sudo systemctl start nimbus
The Nimbus beacon chain and validator are now enabled.

WHAT's NEXT
Now you need to wait for the Eth1 blockchain and the beacon chain to get synced. In a few hours the validator will get enabled and put into a queue. These are the validator status that you will see until its final activation:
Finally, it will get activated and the staking process will start.
Congratulations!, you join the Medalla Eth2.0 multiclient testnet!

Grafana Dashboards

We configured 5 Grafana Dashboards to let users monitor both Eth1.0 and Eth2.0 clients. To access the dashboards just open your browser and type your Raspberry IP followed by the 3000 port:
http://replace_with_your_IP:3000 user: admin passwd: ethereum 
There are 5 dashboards available:
Lots of info here. You can see for example if Geth is in sync by checking (in the Blockchain section) if Headers, Receipts and Blocks fields are aligned or find Eth2.0 chain info.

Updating the software

We will be keeping the Eth2.0 clients updated through Debian packages in order to keep up with the testnet progress. Basically, you need to update the repo and install the packages through the apt command. For instance, in order to update all packages you would run:
sudo apt-get update && sudo apt-get install geth teku nimbus prysm-beacon prysm-validator lighthouse-beacon lighthouse-validator
Please follow us on Twitter in order to get regular updates and install instructions.
https://twitter.com/EthereumOnARM

References

  1. https://github.com/goerli/medalla/tree/mastemedalla
  2. https://www.reddit.com/ethereum/comments/hhvi2ethereum_on_arm_new_eth20_raspberry_pi_4_image/
  3. https://github.com/ethereum/go-ethereum/releases/tag/v1.9.20
  4. https://github.com/ethereum/eth2.0-deposit-cli/releases
  5. https://github.com/prysmaticlabs/prysm/releases/tag/v1.0.0-alpha.23
  6. https://github.com/PegaSysEng/teku
  7. https://github.com/sigp/lighthouse/releases/tag/v0.2.8
  8. https://github.com/status-im/nim-beacon-chain
  9. https://grafana.com
  10. https://www.balena.io/etcher
  11. https://github.com/ethereum/eth2.0-specs/releases/tag/v0.12.2
  12. https://blog.ethereum.org/2020/08/03/eth2-quick-update-no-14
  13. https://goerli.net
  14. https://metamask.io
submitted by diglos76 to ethereum [link] [comments]

Ethereum on ARM. New Eth2.0 Raspberry pi 4 image for automatically joining Prylabs Onyx Eth2.0 testnet. Step-by-step guide for installing and activating a validator.

TL;DR: Flash your Raspberry Pi 4, plug in an ethernet cable, connect the SSD disk and power up the device to join the Eth2.0 Onyx testnet.
The image takes care of all the necessary steps to join the Eth2.0 Onyx testnet [1], from setting up the environment and formatting the SSD disk to installing and running the Ethereum Eth1.0 and Eth2.0 clients as well as starting the blockchains synchronization (for both Geth Eth1.0 Goerli [2] and Prysm [3] Eth2.0 Beacon Chain).
You will only need to create a validator account, send the deposit of 32 Goerli ETH to the Onyx contract and start the validator systemd service.
MAIN FEATURES
SOFTWARE INCLUDED

INSTALLATION GUIDE AND USAGE

RECOMMENDED HARDWARE AND SETUP
STORAGE
You will need and SSD to run the Ethereum clients (without an SSD drive there’s absolutely no chance of syncing the Ethereum blockchain). There are 2 options:
In both cases, avoid getting low quality SSD disks as it is a key component of you node and it can drastically affect the performance (and sync times). Keep in mind that you need to plug the disk to an USB 3.0 port (in blue).
IMAGE DOWNLOAD AND INSTALLATION
1.- Download the image:
http://www.ethraspbian.com/downloads/ubuntu-20.04-preinstalled-server-arm64+raspi-eth2-onyx.img.zip
SHA256 13bc7ac4de6e18093b99213511791b2a24b659727b22a8a8d44f583e73a507cc
2.- Flash the image
Insert the microSD in your Desktop / Laptop and download the file:
Note: If you are not comfortable with command line or if you are running Windows, you can use Etcher [8]
Open a terminal and check your MicroSD device name running:
sudo fdisk -l 
You should see a device named mmcblk0 or sdd. Unzip and flash the image:
unzip ubuntu-20.04-preinstalled-server-arm64+raspi-eth2-onyx.img.zip sudo dd bs=1M if=ubuntu-20.04-preinstalled-server-arm64+raspi.img of=/dev/mmcblk0 conv=fdatasync status=progress 
3.- Insert de MicroSD into the Raspberry Pi 4. Connect an Ethernet cable and attach the USB SSD disk (make sure you are using a blue port).
4.- Power on the device
The Ubuntu OS will boot up in less than one minute but you will need to wait approximately 7 minutes in order to allow the script to perform the necessary tasks to join the Onyx testnet (it will reboot again)
5.- Log in
You can log in through SSH or using the console (if you have a monitor and keyboard attached)
User: ethereum Password: ethereum 
You will be prompted to change the password on first login, so you will need to log in twice.
6.- Forward 30303 and 13000 ports in your router (both UDP and TCP). If you don’t know how to do this, google “port forwarding” followed by your router model.
7.- Getting console output
You can see what’s happening in the background by typing:
sudo tail -f /valog/syslog 
7.- Grafana Dashboards
There are 2 Grafana dashboards to monitor the node (see section “Grafana Dashboards below”.
See [9]

The Onyx Eth2.0 testnet

Onyx is an Eth2.0 testnet created by Prylabs according to the latest official specification for Eth2.0, the v0.12.1 [10] release (which is aimed to be the final).
In order to run an Onyx Eth 2.0 node you will need 3 components:
The image takes care of the Eth1.0 Geth and Eth2.0 Beacon Chain configurations and syncs. So, once flashed (and after a first reboot), Geth (Eth1.0 client) starts syncing the Goerli testnet and the Beacon Chain (Eth2.0 client) gets activated through the Prysm client, both as systemd services.
When the Goerli testnet sync is completed, the Beacon Chain starts syncing. Both chains are necessary as the validator needs to communicate with them (as explained below).
Activating the validator
Once Goerli and the Beacon chain are in sync you have just one task left, configure the Validator for enabling the staking process.
The image provides the Prysm validator client for running the staking process. With this validator, you will create an account with 2 keys (public and private) and get an HEX string that needs to be sent to the Eth 1.0 blockchain as data through a 32 ETH transaction.
The Beacon Chain (which is connected to the Eth1 chain) will detect this deposit (which includes the validator public key) and the Validator will be activated.
So, let’s get started. Geth Goerli testnet and the Beacon Chain are already syncing in the background. Goerli will sync in about 1 hour and the Beacon Chain in about 2 hours (so this will take 3 hours overall).
The easiest way to enable a Prysm validator is to use the Prylabs web portal to get Goerli ETH (testnet ETH) and follow their instructions:
https://prylabs.net/participate
Let’s break this down:
Step 1) Get Prysm
Nothing to do here. Prysm is already installed.
Step 2) Get GöETH — Test ETH
We need 32 ETH to stake (it is fake ETH as this is a tesnet). Prylabs created a faucet with a great UI so you can easily get 32.5 Goerli ETH.
You will need a web3 provider to use the faucet. Install Metamask browser extension (if you don’t have it running yet). Create an account and set the network to “Goerli test network” (on the top of the Metamask screen). Now, click once in “Metamask” and then click “Need GoETH?” button. Confirm the transaction.
Once funded, you will see something like this:
You are 0x0b2eFdbFB8EcaF7F4eCF6853cbd5eaD86510d63C and you have 32.5 GöETH. 
Step 3). Generate a validator public / private key
Go to your Raspberry Pi console and run the following command (make sure you are logged in with your ethereum user):
validator accounts create 
Press return to confirm the default path
Enter a password twice (you will need it later to run the validator so write it down and be careful). Once finished, your account will be created (under the /home/ethereum/.eth2validators directory) containing, among other info, your validator keys. Additionally you will get the deposit data as follows (this is an example):
========================Deposit Data======================= 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 =================================================================== ***Enter the above deposit data into step 3 on https://prylabs.net/participate*** 
Copy this data (just the hexadecimal part, from 0x to the last number), go back to step 3 of Prylabs website and paste it into the field “Your validator deposit data”.
Step 4) Start your beacon chain & validator clients
Beacon chain is already running in the background so let’s configure the validator. Just edit the /etc/ethereum/prysm-validator.conf file and replace “changeme” string with your password (you can use nano or vim editors). Now run:
sudo systemctl enable prysm-validator && sudo systemctl start prysm-validator 
Check if everything went right by running:
sudo systemctl status prysm-validator 
Step 5) Send a validator deposit
We are almost there. Just click the “Make deposit” button and confirm the transaction.
Done!
Now you need to wait for the validator to get activated. In time, the beacon chain will detect the 32 ETH deposit (which contains the validator public key) and the system will put your validator in queue. These are the validator status that you will see during the activation process:

Grafana Dashboards

We configured 2 Grafana Dashboards to let users monitor both Eth1.0 and Eth2.0 progress. To access the dashboards just open your browser and type your Raspberry IP followed by the 3000 port:
http://replace_with_your_IP:3000 user: admin passwd: ethereum 
There are 3 dashboards available:
Lot of info here. You can see for example if Geth is in sync by checking (in the Blockchain section) if Headers, Receipts and Blocks are aligned or easily find the validator status.

Whats's next

We are planning a new release for a multi testnet Eth2.0 network including Prysm, Teku and Lighthouse client (and hopefully Nimbus).

Gitcoin Grant

Gitcoin Grants round 6 is on!. If you appreciate our work, please consider donating. Even $1 can make the difference!
https://gitcoin.co/grants/384/ethereum-on-arm
Follow us on Twitter. We post regular updates and info you may be interested in!
https://twitter.com/EthereumOnARM

References

  1. https://medium.com/prysmatic-labs/introducing-the-onyx-testnet-6dadbd95d873
  2. https://goerli.net
  3. https://docs.prylabs.network/docs/getting-started/
  4. https://www.reddit.com/ethereum/comments/gf3nhg/ethereum_on_arm_raspberry_pi_4_images_release/
    1. Installation script: https://github.com/diglos/pi-gen/blob/ethraspbian2.0/stage2/04-ethereum/files/rc.local.eth2.onyx
  5. https://github.com/ethereum/go-ethereum/releases/tag/v1.9.15
  6. https://github.com/prysmaticlabs/prysm/releases/tag/v1.0.0-alpha.13
  7. https://grafana.com/
    1. Prysm Dashboard: https://github.com/GuillaumeMiralles/prysm-grafana-dashboard/tree/master
  8. https://etcher.io
  9. https://twitter.com/EthereumOnARM/status/1277184480189517824
  10. https://github.com/ethereum/eth2.0-specs/releases
  11. https://github.com/goerli/altona
submitted by diglos76 to ethereum [link] [comments]

[ANN][ANDROID MINING][AIRDROP] NewEnglandcoin: Scrypt RandomSpike

New England
New England 6 States Songs: https://www.reddit.com/newengland/comments/er8wxd/new_england_6_states_songs/
NewEnglandcoin
Symbol: NENG
NewEnglandcoin is a clone of Bitcoin using scrypt as a proof-of-work algorithm with enhanced features to protect against 51% attack and decentralize on mining to allow diversified mining rigs across CPUs, GPUs, ASICs and Android phones.
Mining Algorithm: Scrypt with RandomSpike. RandomSpike is 3rd generation of Dynamic Difficulty (DynDiff) algorithm on top of scrypt.
1 minute block targets base difficulty reset: every 1440 blocks subsidy halves in 2.1m blocks (~ 2 to 4 years) 84,000,000,000 total maximum NENG 20000 NENG per block Pre-mine: 1% - reserved for dev fund ICO: None RPCPort: 6376 Port: 6377
NewEnglandcoin has dogecoin like supply at 84 billion maximum NENG. This huge supply insures that NENG is suitable for retail transactions and daily use. The inflation schedule of NengEnglandcoin is actually identical to that of Litecoin. Bitcoin and Litecoin are already proven to be great long term store of value. The Litecoin-like NENG inflation schedule will make NewEnglandcoin ideal for long term investment appreciation as the supply is limited and capped at a fixed number
Bitcoin Fork - Suitable for Home Hobbyists
NewEnglandcoin core wallet continues to maintain version tag of "Satoshi v0.8.7.5" because NewEnglandcoin is very much an exact clone of bitcoin plus some mining feature changes with DynDiff algorithm. NewEnglandcoin is very suitable as lite version of bitcoin for educational purpose on desktop mining, full node running and bitcoin programming using bitcoin-json APIs.
The NewEnglandcoin (NENG) mining algorithm original upgrade ideas were mainly designed for decentralization of mining rigs on scrypt, which is same algo as litecoin/dogecoin. The way it is going now is that NENG is very suitable for bitcoin/litecoin/dogecoin hobbyists who can not , will not spend huge money to run noisy ASIC/GPU mining equipments, but still want to mine NENG at home with quiet simple CPU/GPU or with a cheap ASIC like FutureBit Moonlander 2 USB or Apollo pod on solo mining setup to obtain very decent profitable results. NENG allows bitcoin litecoin hobbyists to experience full node running, solo mining, CPU/GPU/ASIC for a fun experience at home at cheap cost without breaking bank on equipment or electricity.
MIT Free Course - 23 lectures about Bitcoin, Blockchain and Finance (Fall,2018)
https://www.youtube.com/playlist?list=PLUl4u3cNGP63UUkfL0onkxF6MYgVa04Fn
CPU Minable Coin Because of dynamic difficulty algorithm on top of scrypt, NewEnglandcoin is CPU Minable. Users can easily set up full node for mining at Home PC or Mac using our dedicated cheetah software.
Research on the first forked 50 blocks on v1.2.0 core confirmed that ASIC/GPU miners mined 66% of 50 blocks, CPU miners mined the remaining 34%.
NENG v1.4.0 release enabled CPU mining inside android phones.
Youtube Video Tutorial
How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 1 https://www.youtube.com/watch?v=sdOoPvAjzlE How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 2 https://www.youtube.com/watch?v=nHnRJvJRzZg
How to CPU Mine NewEnglandcoin (NENG) in macOS https://www.youtube.com/watch?v=Zj7NLMeNSOQ
Decentralization and Community Driven NewEnglandcoin is a decentralized coin just like bitcoin. There is no boss on NewEnglandcoin. Nobody nor the dev owns NENG.
We know a coin is worth nothing if there is no backing from community. Therefore, we as dev do not intend to make decision on this coin solely by ourselves. It is our expectation that NewEnglandcoin community will make majority of decisions on direction of this coin from now on. We as dev merely view our-self as coin creater and technical support of this coin while providing NENG a permanent home at ShorelineCrypto Exchange.
Twitter Airdrop
Follow NENG twitter and receive 100,000 NENG on Twitter Airdrop to up to 1000 winners
Graphic Redesign Bounty
Top one award: 90.9 million NENG Top 10 Winners: 500,000 NENG / person Event Timing: March 25, 2019 - Present Event Address: NewEnglandcoin DISCORD at: https://discord.gg/UPeBwgs
Please complete above Twitter Bounty requirement first. Then follow Below Steps to qualify for the Bounty: (1) Required: submit your own designed NENG logo picture in gif, png jpg or any other common graphic file format into DISCORD "bounty-submission" board (2) Optional: submit a second graphic for logo or any other marketing purposes into "bounty-submission" board. (3) Complete below form.
Please limit your submission to no more than two total. Delete any wrongly submitted or undesired graphics in the board. Contact DISCORD u/honglu69#5911 or u/krypton#6139 if you have any issues.
Twitter Airdrop/Graphic Redesign bounty sign up: https://goo.gl/forms/L0vcwmVi8c76cR7m1
Milestones
Roadmap
NENG v1.4.0 Android Mining, randomSpike Evaluation https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/NENG_2020_Q3_report/NENG_2020_Q3_report.pdf
RandomSpike - NENG core v1.3.0 Hardfork Upgrade Proposal https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2020Q1_Report/Scrypt_RandomSpike_NENGv1.3.0_Hardfork_Proposal.pdf
NENG Security, Decentralization & Valuation
https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2019Q2_report/NENG_Security_Decentralization_Value.pdf